Headquarters: World War II News

It is Oleksandr from Starni Games with the new Dev log entry. Last time we discussed tanks, so now I want to tell about things that are capable of stopping the enemy tanks in Headquarters: World War II. Today we will be having an in-depth look at such units as the Anti-tank guns, Anti-Aircraft guns, and Recon vehicles.



What anti-tank weapons are available?

Headquarters: World War II will be focusing on the Normandy landings, so the list of available units is limited to what was operated during that time. The key tank killers in the game (apart from other tanks) are AT guns and AA guns, while Recon cars could be useful to scout the enemy armor in advance.
It is worth noting that Infantry could also be very deadly against tanks, especially in difficult terrain, but we would discuss that in the next Dev log, where we will have an in-depth look at all Infantry units.

So, here is the list of available anti-tank units and their preview:

Towed Anti-tank guns:
50 mm Pak. 38 (GER)

75 mm Pak. 40 (GER)

88 mm Pak. 43 (GER)

57 mm Ordnance QF 6-pounder (UK)

57 mm Gun M1 (US)

76 mm Ordnance QF 17-pounder (UK)



Self-propelled Anti-tank guns:
Jagdpanzer 38 - Hetzer (GER)

Jagdpanther (GER)

17pdr SP M10 "Achilles" (UK)

M10 tank destroyer (US)

M18 Hellcat (US)


Towed Anti-aircraft guns:
88 mm Flak (GER)

QF 3.7-inch AA gun (UK)

90 mm gun M2


Self-propelled Anti-aircraft guns:
Sd.Kfz. 7/1 (GER)

Crusader III AA Mk.I (UK)

M16 MGMC


Recon vechicles:
Type 82 Kübelwagen (GER)

Sd.Kfz. 234 2 - Puma (GER)

Willys MB (US, UK)

Daimler Armoured Car Mk II (UK)

M8 Greyhound (US)


How are the anti-tank guns implemented in the game?

The smaller caliber towed guns can move a small distance without a truck, while bigger guns have to be moved via transport vehicles. This makes Self-propelled guns much more mobile and versatile tools, able to move fast and maneuver to the best firing position and destroy enemy tanks. While towed guns are good for stationary positions and ambushes, they are quite very vulnerable but pack a solid punch.



How effective are the AA guns versus tanks?

While self-propelled AA units listed above are not very effective and can penetrate only lightly armored targets, the towed large caliber AA guns can be very effective against enemy armor, same as large caliber AT guns. They can be used for setting up ambushes and dealing with the heavily armored units of the enemy.



What do recon cars have to do with anti-tank warfare?

While not technically anti-tank weapons, light cars, such as Type 82 Kübelwagen or Willys MB are good means to spot the enemy armored units before they locate your troops and prepare an ambush. You can also quickly retreat, covering yourself with smoke grenades, if spotted by the enemy armor, cutting the enemy’s line of fire. At the same time, more advanced recon vehicles, such as Sd.Kfz. 234 2 - Puma, Daimler Armoured Car Mk II, or M8 Greyhound could be used to outflank and destroy enemy armor, attacking them from the rear, as they have pretty decent AT guns, that can be quite effective if you manage to sneak up on the enemy armor from the rear.



I know you would probably want to know much more about the game - so ask me any questions you have and I will do my best to answer these questions on forums, or in the next Dev logs.
Next time I will tell you more about numerous types of Infantry units in Headquarters: World War II, including the anti-tank squads, so please, stay tuned.

See you next time!

Hello!

It is Oleksandr from Starni Games with the new Dev log entry. Some of you have been asking about the list of available units in the game - and today we will discuss the topic that is exciting for many - tanks in Headquarters: World War II. I will present to you all models we plan to have at launch and we will discuss what are the strengths and weaknesses of each playable country. If you would like to know more - please follow the link below to access the full Dev log article.



What tanks are available?

Headquarters: World War II will be focusing on the Normandy landings, so the list of available units is limited to what was operated during that time. Some units appear closer to the end of single-player campaigns, or even available only in multiplayer as they arrived a bit late for the historical operations featured in the game.

So, here is the list of available tank units and their preview:

Light tanks:
M3 Stuart (US, UK)


Medium tanks:
Cromwell (UK)

Sherman M4A1 (US, UK)

Sherman Rhino (US, UK)

Sherman M4A1 76(W) (US)

Sherman Firefly (UK)

Sherman M4A1 Flamethrower (US)

Panzer IIIE (GER)*

Panzer IIIN (GER)*

Panzer IVH (GER)

Panzer III Fl (Flamethrower) (GER)


*way outdated by 1944, various Panzer III models still fought in Normandy historically, although in small numbers. It may seem a bit far-fetched historically, but it would also be not fully accurate if the German troops were to field only Tigers and Panthers, so we had to include some older tank models as well.

Heavy tanks:
Churchill Mk VII (UK)

Churchill Crocodile (Flamethrower) (UK)

Sherman M4A3E2(76)W (Jumbo) (US)

Panther (GER)

Tiger (GER)

Tiger II (Koenigstiger) (GER)


What is the right camo for the tank? It is your choice.

We have heard a lot of questions about the authenticity of the camo of the German units. In many screenshots, you could see the German units in grey camo which had been used in 1939-1943 but was outdated by the time of the Normandy landings. We use it as a default camo, but there is a powerful customization tool in the game that allows you to customize every unit’s camo and special signs as you think would be most appropriate.



We know that camo is an important part of WW2 history. However, it changed depending on the time and war theater. That is why we have one default camo that makes it easy to differentiate between countries - olive color for the US, sand color for the UK, and grey color for Germany. The camo that is right for each operation can be easily set by every player to make sure it is correct and give the right feel about what is happening on screen.



Our goal was to create a flexible tool that allows the creation of various scenarios and set-ups including battles in different periods of WWII and on different fronts, allowing you to use the correct camo for every situation and not just keep it Normandy-specific.

I will share more information about the customization of units in one of the future Dev log entries.

What are the key differences between countries in terms of tanks?

If we speak about the summer of 1944, German troops had the strongest armor if we compare individual vehicles. That is reflected in the game and German troops may seem imbalanced at first glance. However, the difference is not too steep and the right tactics are much more important than certain vehicles being better. German troops are also more expensive in multiplayer, so losing them is much more impactful. You could use less armored, but mobile AT vehicles to outmaneuver German armor and destroy powerful but less numerous enemies.



The British troops can fight tank battles quite effectively, thanks to the Sherman Firefly tanks, which have guns comparable with the best German tanks, but much weaker armor. Still, if combined with the right tactics they can be quite fearsome on the battlefield. Other fascinating vehicles are Churchill tanks - which have very strong armor but might lack the firepower to punch through the best enemy tanks. Still, they may be very hard for the enemy to take down.



The US troops struggle to win tank battles face-to-face with the best German tanks (Sherman M4A1 vs Tiger), so they have to be smart about it. US troops have good mobile AT capabilities (which we will touch on in the next Dev log in more detail) allowing them to flank and destroy the German armor with powerful guns that have little protection but are cheaper than the German tanks they could destroy. Another way to do it would be to use more advanced Sherman modifications, such as Sherman Jumbo with a 76 mm gun, which arrived too late for the campaign but can be used in multiplayer games. It combines powerful armor with quite a decent gun.



Right now we are happy with how tank combat works, but to truly understand how the game balance works you will have to take all types of units into consideration, especially Infantry which could be very lethal to vehicles in ambushes and close-quarters combat.

I know you would probably want to know much more about the game - so ask me any questions you have and I will do my best to answer these questions on forums, or in the next Dev logs.
Next time I will tell you more about one of the ways to deal with the enemy armor, namely AT guns and Recon vehicles, so please, stay tuned.

See you next time!

Hello!

It is Oleksandr from Starni Games with the new Dev log entry. Today, I will tell you about the different unit types you can deploy in Headquarters: World War II. I will also explain how we designed various units and balanced their parameters taking into account all the real-life data. If you would like to know more - please follow the link below to access the full Dev log article.



How do we choose which units to have in Headquarters: World War II?

There are several things we kept in mind when making a list of units that are available in the game. First of all, the events of the game cover Operation Overlord (6 June – 30 August 1944), so we have to look for the models that were more or less widely used on the European front during that period. Secondly, we look at how well they fit together and what role every unit could fulfill.



It is quite complicated, because many units that would have been very useful become available later during the war and so on.

How do we set the parameters for each unit?

First and foremost, we do in-depth research of all the real data on unit parameters - which is often not as easy a task as it could seem at first glance. That is because many sources of information provide different data on the same parameters, and some parameters are very hard to find. So, in-depth research is required to make sense of all the different and often contradictory sources.

Doing the correct research and its educated interpretation is only the beginning though. We cannot just throw all the historical data into the game and make it work. We have to choose which parameters the in-game units will have and how real-life parameters translate into the in-game values. That is very tricky since we want the game to be both historical and balanced, while most units were not truly balanced historically.

This is where it becomes more art than science, but we follow one simple rule at all times: if A is better than B in real life, then A is better than B in the game. So, if a gun has a better armour penetration historically, it will have a higher AP attack value in the game. If unit A had better frontal armour in real life than unit B - it will have a higher front armour value in the game, and so on.

A couple of examples to see why estimating real-life parameters is hard: you can easily look up the data on armour thickness, but there is also the armoring angle that plays a crucial role. Additionally, there could be different materials and casting used at different times/models. So, in the end, it is really hard to take all of that into account.

Another example would be the guns, which have two key parameters used to determine their armour penetration capabilities - the caliber (76mm) and the barrel length in calibers (L40). That is not the end though, as you have to check the armour penetration values from the real tests at different distances using different types of ammo, and so on. That is the only way to see how guns truly compare to each other.

What types of units do we have in the game?

All units are split into categories (or classes), and since life is complicated we ended up having a lot of them. So, here is how we grouped the units:



Infantry:

Regular
Scout
Paratrooper
Elite
Sniper
Flamethrower
Machine gun
Anti-tank unit
Mortar



Towed guns:

Towed AT gun
Towed AA gun
Towed Artillery



Vehicles:

Armored car
Light tank
Medium tank
Heavy tank
Assault gun
Self-propelled AT gun
Self-propelled AA gun
Self-propelled Artillery
Armored Personnel Carriers
Trucks

What countries do we have in the game?

Currently, we have three major factions playable in both campaign and multiplayer - US, UK, and Germany. Additionally, we have smaller unit lineups for Polish and Canadian troops, which occasionally appear in the campaigns.



Where can I see the full list of units?

I will share with you all the unit models currently in the game in the next Dev logs where we will have a closer look at how different countries compare in terms of units in various categories. The next one will be dedicated to tank units across all nations. So, please, stay tuned.

See you next time!

Hello!

It is Oleksandr from Starni Games with the fourth Dev log entry. Today, I will tell you more about various terrain types and how they affect the battle in Headquarters: World War II. I will also explain how the elevated terrain works and how your troops can benefit from it.



Difficult terrain is an Infantry domain

Only Infantry units can move into Forests and Rough terrain, and enter buildings. This makes Infantry units much more versatile and survivable. They can move where tanks and other vehicles cannot.



Infantry units can get excellent Cover in the woods or in the building, and they will be a really tough nut to crack. So, Infantry gameplay is all about the right usage of terrain. Now, let us go over the key terrain types in more detail.

Forest is the best place for your Infantry to defend from

Forest tiles offer great cover, and extra camouflage (meaning your troops are harder to spot), and it blocks the line of fire, making units behind the forest safe from direct long-range attacks. To sum up - it is an excellent place for defense or ambush of the enemy armor.



The enemy vehicles have to move by road through the woods, and cannot go off the road, while your AT Infantry could move through the forest freely, making it easy for them to maneuver around enemy vehicles to get the best attack angles and breach their armor.





The enemy column is in shambles, and the Infantry is victorious this time. And rightly so - tanks are much more powerful units overall, but they are at their best in the open terrain where they can put to use their advantage in range and firepower and tear through the Infantry lines.



Rough terrain is the next best thing

Infantry can take cover in Rough terrain, even though the bonuses are smaller than in the woods, and the Rough tiles do not block the Line of fire. Still, it is very advantageous for the Infantry to take good positions in Rough terrain if there are no better options.



High vegetation is the perfect hiding spot

Try to look for the enemy Infantry in the middle of the sunflower fields - that is far from an easy task. All kinds of High vegetation terrain offer good bonuses to camouflage and cover, but only to units with low Profile (mostly Infantry and a few smaller vehicles).



Large units like tanks do not gain extra camouflage or cover in the fields, so while they can enter High vegetation tiles (unlike Forest and Rough) they will not be getting any bonuses.



The smaller units will get the bonuses, so fighting in the fields would be a tricky task for the armoured units, but much more manageable than in the woods.



Now to the craziest thing in any war - the city battles

The city is somewhat similar to Forest terrain, as there are lots of buildings for the Infantry to hide in that provide great cover and block a Line of fire. However, buildings, unlike forests, can be destroyed, reducing the bonuses they provide. Though, even a fully destroyed building still offers some cover.



When storming cities and villages you have a few choices, one of which would be a scorched earth tactic - demolishing buildings one by one to leave the enemy forces without superior cover, at a cost of losing lots of time. Another - smarter approach would be to give your vehicles an Infantry escort that would move through the buildings to locate the enemy Infantry positions and guide your vehicles through the town relatively safely.



The key to successful city battles is the proper coordination between Infantry and motorized units. The flamethrower squads are especially useful when storming fortified enemy positions. And scouts or snipers could give advanced warning of the enemy ambushes and hiding places.



Will you just raze the city to the ground with tanks and artillery, or would you try to capture it almost unscathed by using superior tactics and troops' coordination? The choice is yours.

A king of the hill

Hills in the game are presented as an Elevated terrain mechanic which works as follows: all tiles on the map have not only X and Y coordinates, but also Z - the height, or Elevation level. So, you can have part of the map where the Elevation is 0, some parts where the Elevation is at level 1, 2, and so on. Currently, the highest Elevation level is 5.



Each level of elevation gives a unit extra spotting and camouflage, meaning you see further from the Hill, but the enemies have a harder time seeing you from below. What is even more important though, is the difference in the elevation of the units in combat affects the accuracy - the unit with a higher elevation level receives an accuracy bonus for each level of advantage in Elevation.



What is more, if your unit is higher - your attacks start to partially hit the enemy's top armor - where the armor planting is the weakest. We calculate the angle of attack and take into account a portion of the top armor exposed. You can always see all the detailed calculations and angles in the extended Combat prediction window.

Last but not least, Elevation could block a Line of fire in some cases depending on how the units are positioned, so you cannot fire “through” a hill.



It all may sound like a lot to take in, but basically, what you have to know from the start is that being on higher terrain is beneficial both for scouting and for attacking the enemy forces. Armored units are more vulnerable to attacks from the hill, while all units have better accuracy when firing from above.

Coming up next

In the next Dev log, I will focus more on the units' composition, various units, and their types. A lot of nice unit pictures are incoming, as well as, an overview of what we will have in terms of units overall.


See you next time!

Hello!

It is Oleksandr from Starni Games with the third Dev log entry. Today, I will tell you more about the highly realistic environment in Headquarters: World War II and how you can interact with it to change the battlefield as the combat progresses, by destroying buildings, walls, and other objects.




The visual appeal
One of the key aspects of Headquarters: World War II is that despite a very serious topic - World War II, it has visually appealing peaceful towns (until you start demolishing them that is), making a stark contrast between this peaceful beauty and the war raging around and threatening to start wreaking havoc any moment.




The finer details
We put a lot of work into creating a very detailed environment - we have misc items on the tables in the yard and even mushrooms in the forest you could zoom in and look for.




Buildings destruction
The vast majority of buildings in the game can be destroyed, changing the way they affect the combat. Each building has 3 states: regular, damaged, and destroyed.



Each has its own set of bonuses it provides to the unit occupying it, which diminish as destruction progresses. So, if a building that served as the advanced position for your troops has collapsed - a sensible option would be to move to a better position.




Obstacles destruction
Apart from buildings, there are other things you can interact with - various walls and other things that could block your path. Landing a couple of shots near them could destroy the object. Another approach would be to drive your heavy tanks right through the pesky roadblock. They also provide combat bonuses, and your ability to destroy them depends on the type of unit - jeeps cannot punch through stone walls, but tanks could.




Dynamic battlefield
Being able to destroy objects on the battlefield adds an extra tactical layer to combat. Being able to react quickly to these changes, or creating new opportunities yourself - is one of the key elements of the game.




Coming up next

In the next Dev log, I will focus more on the different terrain types and explain the elevated terrain mechanics. I will tell you more about:

• Different terrain types
  
• Elevated terrain mechanics
  
• Terrain’s interaction with the Line of Fire
  

See you next time!