LOYALIST RANKS INCREASE IN STRENGTH

The latest addition to our merchandise store is four new pewter miniature sets from Brigador at 1:144 scale. They are:

• 2x Buckmaster
• 2x Fork
  
• A powersuit selection of 4x Mongoose, 2x Dorothy & 2x Pellinore
• 24x Loyalist Infantry AKA "Daves"
  

These new models were made by one of our community members, who makes minis as part of their day job at Mindworm Games.

Like before, the miniatures are being sold at introductory prices for the first month, which are:


Prices are not the same for the four miniatures due to the different amounts of pewter required. In addition, you will receive 15 USD off when adding three of any miniature to your cart.

Please note that this introductory period will last until Thursday February 29th, after which they will go up to their intended value. The sums indicated above also do not account for shipping.

We learned a lot from the previous run and have taken precautions to deal with any potential influxes of demand or delays. If it so happens that you see a miniature to be out of stock on our store, it should be back in stock within about two weeks. In addition, the latest run of minis will come with new stickers on the blister packs.


Since the spincasting process was already detailed in this post from August last year, the rest of this article will detail the contents of each blister pack, along with a few pictures from the workshop. All models come unpainted and unassembled. The images of painted models we provide in this article and on our merchandise store are for demonstration purposes.

If you’d like to buy a pewter mini right now - head on over to our store. Otherwise, please enjoy the rest of the article.


[h2]LOYALIST LIGHT MECH `BUCKMASTER`[/h2]
Buckmaster on the right, Fork on the left

The Buckmaster loyalist light mech has a Zeus railgun for its main hardpoint and a choice of three weapons for its small hardpoint: a Bonesaw machine gun, a Faker fragmentation mortar, and a Pinch rocket launcher. Each blister pack contains two Buckmasters, unassembled and unpainted.


Assembled, the height of the Buckmaster is approximately 1.275 inches tall, or about 3.24 cm.

Buckmaster on the right, Fork on the left

[h2]LOYALIST LIGHT MECH `FORK`[/h2]
Fork on the left, Buckmaster on the right

The Fork loyalist light mech has two turret hardpoints and a choice of four weapons for those slots: a Scimitar gatling mortar, a Disco disruption laser, a Confessor HE cannon, and a Crambo machine gun. Each blister pack contains two Forks, unassembled and unpainted.


Assembled, the height of the Fork is approximately 1.171 inches tall, or about 2.97 cm.

Fork on the left, Buckmaster on the right

[h2]LOYALIST POWERSUITS `MONGOOSE` ` PELLINORE` & `DOROTHY`[/h2]
Front: Mongooses, Middle: Pellinores, Back: Dorothys

The Powersuit pack contains a squad of four Mongooses and two pairs of Dorothys and Pellinores, unpainted and unassembled. The Mongooses have two small hardpoints and are provided with a duo of the following small arms to mix and match as you see fit:

• Carlos cannon
  
• Garigari rotary percussion drill
  
• Democlaw
  
• Bonesaw machine gun (two pairs)
  
• Temblor laser
  
• Donkey recoilless rifle
  

The Dorothy can place a Balao mortar or Duchess MG on its main hardpoint, and for its small hardpoint a Faker mortar, a Pinch rocket launcher, a Bonesaw MG, or a Donkey recoilless rifle.

The Pellinore has a choice of Preacher cannon or Galinha laser for its auxiliary hardpoint, and can use the same set of weapons for its small hardpoint as the Dorothy to go with its shield.


Assembled, the tallest powersuit is the Dorothy at approximately 0.89 inches tall (or about 2.26 cm), followed by the Pellinore at 0.84 inches (~2.13 cm) and then the Mongoose at 0.814 inches (~2.06 cm).

Pellinores front, Dorothys behind

[h2]LOYALIST INFANTRY AKA "DAVES"[/h2]

The Daves are in 24 different poses. Nine of them are carrying Zweenie lasers, eight of them are equipped with Nobrelite AR18 rifles, four are holding Pinch rocket launchers and three are wielding Bonesaw machine guns. The image below is how the Daves were posed in Blender prior to 3D printing and subsequent molding.


The Daves come unpainted and require no assembly as they are already attached to a pewter base.


Here are painted versions of the Pinch Daves...


Here are the Nobrelite riflemen up front and machine gunners in the back...


And here are the Daves armed with Zweenies.


The height of each Dave varies depending on pose, but they are roughly 0.7 inches high, or 1.77 cm.

Lastly, here are the final weights for each set of miniatures.



If you are newcomers to miniature assembly, we have updated our assembly guide to include the new models for people just like you.

https://steamcommunity.com/sharedfiles/filedetails/?id=3018909970
Finally, Stellar Jockeys thanks everyone for the positive reception to (and patience waiting for) the initial run last summer. To both celebrate the response and in anticipation of the new models featured in this article, our community discord ran the Olive Drab Everything mini painting contest from September to October and received a wonderful set of responses. The winners of that competition have already received their pick of the new models. You can view a gallery of the various entrants and winning submissions here and we look forward to seeing what people do with the new store additions.